No More Kaboom !

Severe engine damage and explosion can occur if an engine is starved for fuel, especially at full throttle. This is a common problem when the fuel shutoff valve becomes partially closed due to vibration, especially tire shake. Solution: A Over-center Bracket. This bracket setup will hold the shutoff valve positively in the ON position until it is turned off manually. If partial closure of the shutoff valve is required during warm up, simply remove the spring from the bracket and run as necessary. Machined from billet aluminum and consist of the billet arm, Stainless Steel spring and mounting hardware. This assembly is designed to work on both the AN6 and AN8 Enderle fuel shutoff valves.