For Immediate Release
Aug 1, 2011
Don't Get Bent out of Shape
Valve train failure is
normally catastrophic and a
bent push rod can be
attributed as a culprit in
many instances. A pushrod
out-of-round as little as
.010 will begin to flex. You
may have seen the wear marks
on the sides of your
pushrods and wonders how did
they get there. Can you say
flex? Followed by failure.
With the Pushrod
Checker, one simply insert
the pushrod into the spring
loaded ends and within 5
seconds one quickly check
the roundness of a pushrod
to less than .001. Works on
most pushrods including
Chevy, Ford & Mopar. This
Checker may be one of the
most valuable asset in your
toolbox.
|
Contact:
Good Vibrations Racing, 8858 Painter Ave, Suite E, Whittier, CA 90602.
800/576-7661 www.GoodVibrationsRacing.com
Copy Pic for Hi-Resolution Images (For Printing)
Press Releases Archive:
|