« Go back to Search

FRONT

E-5001

FRONT COVER SBC

Your Cost: $179.99

Weight: 2.5 lbs

Enderle's SB Chevy front cover is made of lightweight Cast Aluminum.  Allows one to drive the mechanical fuel pump off the camshaft.

SBC front cover must be used with a Crank Hub or Harmonic Balancer with a 1in shank to prevent clearance issues with the hub bottoming out on the front cover.

Has an oversize opening for a SBC crank with a BBC snout.

  • Requires the use of an oversize seal if using standard SBC crank (p/n E-5002).
     
  • Uses the stock BBC seal if using SBC crank with BBC snout (p/n SCE-11302).
     
  • Requires a Thick Front oil pan seal (p/n SCE-111090) in order for the oil pan to seal properly to the cover.

Seals Sold Separately.

Good Vibrations Motorsports Logo Phone: 562/945-7669 Email: sales@dragparts.com
"Our Ultimate Goal is Your Success"
Good Vibrations has Been Empowering Racers Since 1989

Performance Products | Pre-Owned Parts | Press Releases | Technical | Photo Gallery | Contact Us

We STOCK the following performance race products: Aeromotive, Billet Connection, The Blower Shop (TBS), Control Cable, Deist Safety, DJ Safety, Enderle Fuel Injection, FIE, IMI Hi-Torque, JAZ Products, Lucas Oil, Mallory Ignition, Milodon, Prolong, SCE Gaskets, System 1 Filters, Total Seal Rings, Wilwood and XRP Plumbing. Zoomie Headers & Waterman 

This site has been created & maintained by Good Vibrations Motorsports. All text and material are copyright 1989-2024 by Good Vibrations Motorsports. All logos and images are reserved.