|
[ Up ] [ Unique Clocks ] [ Decals ] [ Racing Apparel ] [ Performance Books ] [ Videos: DVDs ] [ LASD Die Cast Funny Car ]
Power Building Videos is
a series of highly detailed DVD sets covering hot & exciting topics.
Suitable for the novice to the seasoned veteran.
 Superchargers
Superchargers,
also known as blowers, huffer's or forced induction. The ONLY power
adder that's on demand 24/7! This DOUBLE DVD set contains almost 3 hours
of highly detailed information. What are they? How do they work? Which
type and size do you need for your engine? What do you need to do to an
engine to be compatible with a supercharger? What kind of carburetors
can you run? What about fuel injection? Old myths and wives tales about
the reliability and street ability of supercharged engines are finally
put to rest! This DVD set takes you through all of that and MUCH more,
covering numerous types of blowers (both Roots type and centrifugal
types), and several types of engines, with lots of great tips! If you've
ever wanted to build yourself a blown engine, or just wanted to learn
about them, then this video is a must!
(Note: FREE with any
blower kit purchase. Buy the DVD first and you will be reimbursed!)
|
 Performance
Carburetors
This
double DVD show contains almost 3 1/2 hours of HIGHLY detailed, yet
easy to understand information covering numerous brands and types of
carburetors, including Holley, Edelbrock, Demon, Quick Fuel Technology
and Weber (to name a few). Some of the many topics covered include
choosing the right carburetor for your vehicle, single 4 set-ups, 6 pack
set-ups, dual 4's, 2 barrels vs. 4 barrels, and much, much more. You'll
see how each carburetor works, including how to modify one for
the ultimate performance, and to suit your particular vehicle and
driving needs. You'll see how to set, adjust & re-jet. Learn the
difference between vacuum secondaries & double pumpers. You'll
finally be able to put all of the old wives tales to rest! No more crappy
throttle response and problems bogging off the line. You'll learn
all of the secrets to selecting and tuning the right carburetor for your
engine!
You'll
also see how to rebuild and modify a carburetor for the best all around
performance. You'll learn how chokes work and how to set them, how
to tell if you're too lean or too rich, and much, much more! Aaron shows
you everything you ever wanted to know about performance carburetors (and then
some), so you won't make the same mistakes most other people make over
and over again when they choose the wrong carburetor for their engine and
wonder why their car doesn't run very well. It's well worth spending the
money on this video to get the right carburetor the first time, and know how
to set it up so it works the best! This set also includes several pages
of very useful carburetor data and size charts.
|
 Nitrous
Oxide
Nitrous Oxide, aka N2O, Juice, throttle in a bottle,
spray, squeeze, and of course nos. Nitrous is by far THE most
cost effective / biggest "bang for the buck"
power adder there is, but this mysterious substance has a nasty
reputation for melting down and eating-up engines. Once you know the
in's and out's, Nitrous isn't such a bad thing after all, especially
when it's set-up correctly. This double DVD set takes through everything
you ever wanted to know (and then some) about Nitrous, how it works and
how to build your engine and set it up so it will RELIABLY handle this
great substance, (both on the street and at the track). You'll be taken
through several brands and numerous types of systems for both carbureted
and EFI engines, from little 20HP "cheater" systems to giant
600+HP dual stage fogger systems. You'll also learn about electronics,
ignition systems, fuel system upgrades, tips on tuning and jetting and
much, MUCH more! An added bonus in this show are interviews with some of
the founding legends of Nitrous Oxide, who give their extensive insight
on this awesome substance directly to YOU. If you're into nitrous or are
just curious about it, you don't want to miss this show! 3 hrs 45 mins.
|
 Rotating
Assemblies
This Double DVD set contains approximately 3 1⁄2 hours of highly detailed,
yet easy to understand information on how to choose the right parts for your
engine before it gets built. You’ll be taken through many types of cranks,
rods, pistons, rings, bearings, harmonic balancers, flywheels, balancing, and
everything else you can imagine that involves the internal rotating assembly. Building
an engine is one thing, knowing which internal components to use for a given
application, and why you would choose those particular parts is another, and
that’s just what you’ll learn in this show. Arron explains the features,
advantages and disadvantages of each part, and why you would, or wouldn’t
want to use a particular part for your engine, from stock, to street
performance, to all-out racing engines. Should you
run a cast, forged or billet crank? What are the differences and how can you
tell? Which alloy is the best? Should you increase the stroke or decrease the
stroke? Which rods should you go with? I-beam, H-beam, steel or aluminum?
What length should you use? What about rod angles and piston side loading?
Which pistons should you use? Cast, hypereutectic or forged? Domed, dished or
flat tops? Floating or pressed pins? Will you need oil rail supports? Which
bearings should you use? Will they hold-up to heavy loads? Do you need cast,
moly, plasma moly or gapless rings? What is balancing all about? What’s the
difference between internal and external balancing? What does “balanced and
blueprinted” mean? Should you use an aluminum or steel flywheel? These
questions and MANY, MANY more are answered in this show.
|
|
